-- Perl 5.10.0 documentation --
threads::shared

NAME

threads::shared - Perl extension for sharing data structures between threads

VERSION

This document describes threads::shared version 1.14

SYNOPSIS

  use threads;
  use threads::shared;
  my $var :shared;
  $var = $scalar_value;
  $var = $shared_ref_value;
  $var = share($simple_unshared_ref_value);
  my ($scalar, @array, %hash);
  share($scalar);
  share(@array);
  share(%hash);
  my $bar = &share([]);
  $hash{bar} = &share({});
  { lock(%hash); ...  }
  cond_wait($scalar);
  cond_timedwait($scalar, time() + 30);
  cond_broadcast(@array);
  cond_signal(%hash);
  my $lockvar :shared;
  # condition var != lock var
  cond_wait($var, $lockvar);
  cond_timedwait($var, time()+30, $lockvar);

DESCRIPTION

By default, variables are private to each thread, and each newly created thread gets a private copy of each existing variable. This module allows you to share variables across different threads (and pseudo-forks on Win32). It is used together with the threads module.

EXPORT

share , cond_wait , cond_timedwait , cond_signal , cond_broadcast , is_shared

Note that if this module is imported when threads has not yet been loaded, then these functions all become no-ops. This makes it possible to write modules that will work in both threaded and non-threaded environments.

FUNCTIONS

  • share VARIABLE

    share takes a value and marks it as shared. You can share a scalar, array, hash, scalar ref, array ref, or hash ref. share will return the shared rvalue, but always as a reference.

    A variable can also be marked as shared at compile time by using the :shared attribute: my $var :shared; .

    Due to problems with Perl's prototyping, if you want to share a newly created reference, you need to use the &share([]) and &share({}) syntax.

    The only values that can be assigned to a shared scalar are other scalar values, or shared refs:

      my $var :shared;
      $var = 1;              # ok
      $var = [];             # error
      $var = &share([]);     # ok

    share will traverse up references exactly one level. share(\$a) is equivalent to share($a) , while share(\\$a) is not. This means that you must create nested shared data structures by first creating individual shared leaf nodes, and then adding them to a shared hash or array.

      my %hash :shared;
      $hash{'meaning'} = &share([]);
      $hash{'meaning'}[0] = &share({});
      $hash{'meaning'}[0]{'life'} = 42;
  • is_shared VARIABLE

    is_shared checks if the specified variable is shared or not. If shared, returns the variable's internal ID (similar to refaddr()). Otherwise, returns undef.

      if (is_shared($var)) {
          print("\$var is shared\n");
      } else {
          print("\$var is not shared\n");
      }
  • lock VARIABLE

    lock places a lock on a variable until the lock goes out of scope. If the variable is locked by another thread, the lock call will block until it's available. Multiple calls to lock by the same thread from within dynamically nested scopes are safe -- the variable will remain locked until the outermost lock on the variable goes out of scope.

    Locking a container object, such as a hash or array, doesn't lock the elements of that container. For example, if a thread does a lock(@a), any other thread doing a lock($a[12]) won't block.

    lock() follows references exactly one level. lock(\$a) is equivalent to lock($a), while lock(\\$a) is not.

    Note that you cannot explicitly unlock a variable; you can only wait for the lock to go out of scope. This is most easily accomplished by locking the variable inside a block.

      my $var :shared;
      {
          lock($var);
          # $var is locked from here to the end of the block
          ...
      }
      # $var is now unlocked

    If you need more fine-grained control over shared variable access, see Thread::Semaphore.

  • cond_wait VARIABLE
  • cond_wait CONDVAR, LOCKVAR

    The cond_wait function takes a locked variable as a parameter, unlocks the variable, and blocks until another thread does a cond_signal or cond_broadcast for that same locked variable. The variable that cond_wait blocked on is relocked after the cond_wait is satisfied. If there are multiple threads cond_wait ing on the same variable, all but one will re-block waiting to reacquire the lock on the variable. (So if you're only using cond_wait for synchronisation, give up the lock as soon as possible). The two actions of unlocking the variable and entering the blocked wait state are atomic, the two actions of exiting from the blocked wait state and re-locking the variable are not.

    In its second form, cond_wait takes a shared, unlocked variable followed by a shared, locked variable. The second variable is unlocked and thread execution suspended until another thread signals the first variable.

    It is important to note that the variable can be notified even if no thread cond_signal or cond_broadcast on the variable. It is therefore important to check the value of the variable and go back to waiting if the requirement is not fulfilled. For example, to pause until a shared counter drops to zero:

      { lock($counter); cond_wait($count) until $counter == 0; }
  • cond_timedwait VARIABLE, ABS_TIMEOUT
  • cond_timedwait CONDVAR, ABS_TIMEOUT, LOCKVAR

    In its two-argument form, cond_timedwait takes a locked variable and an absolute timeout as parameters, unlocks the variable, and blocks until the timeout is reached or another thread signals the variable. A false value is returned if the timeout is reached, and a true value otherwise. In either case, the variable is re-locked upon return.

    Like cond_wait , this function may take a shared, locked variable as an additional parameter; in this case the first parameter is an unlocked condition variable protected by a distinct lock variable.

    Again like cond_wait , waking up and reacquiring the lock are not atomic, and you should always check your desired condition after this function returns. Since the timeout is an absolute value, however, it does not have to be recalculated with each pass:

      lock($var);
      my $abs = time() + 15;
      until ($ok = desired_condition($var)) {
          last if !cond_timedwait($var, $abs);
      }
      # we got it if $ok, otherwise we timed out!
  • cond_signal VARIABLE

    The cond_signal function takes a locked variable as a parameter and unblocks one thread that's cond_wait ing on that variable. If more than one thread is blocked in a cond_wait on that variable, only one (and which one is indeterminate) will be unblocked.

    If there are no threads blocked in a cond_wait on the variable, the signal is discarded. By always locking before signaling, you can (with care), avoid signaling before another thread has entered cond_wait().

    cond_signal will normally generate a warning if you attempt to use it on an unlocked variable. On the rare occasions where doing this may be sensible, you can suppress the warning with:

      { no warnings 'threads'; cond_signal($foo); }
  • cond_broadcast VARIABLE

    The cond_broadcast function works similarly to cond_signal . cond_broadcast , though, will unblock all the threads that are blocked in a cond_wait on the locked variable, rather than only one.

OBJECTS

threads::shared exports a version of bless REF that works on shared objects such that blessings propagate across threads.

  # Create a shared 'foo' object
  my $foo;
  share($foo);
  $foo = &share({});
  bless($foo, 'foo');
  # Create a shared 'bar' object
  my $bar;
  share($bar);
  $bar = &share({});
  bless($bar, 'bar');
  # Put 'bar' inside 'foo'
  $foo->{'bar'} = $bar;
  # Rebless the objects via a thread
  threads->create(sub {
      # Rebless the outer object
      bless($foo, 'yin');
      # Cannot directly rebless the inner object
      #bless($foo->{'bar'}, 'yang');
      # Retrieve and rebless the inner object
      my $obj = $foo->{'bar'};
      bless($obj, 'yang');
      $foo->{'bar'} = $obj;
  })->join();
  print(ref($foo),          "\n");    # Prints 'yin'
  print(ref($foo->{'bar'}), "\n");    # Prints 'yang'
  print(ref($bar),          "\n");    # Also prints 'yang'

NOTES

threads::shared is designed to disable itself silently if threads are not available. If you want access to threads, you must use threads before you use threads::shared . threads will emit a warning if you use it after threads::shared.

BUGS AND LIMITATIONS

When share is used on arrays, hashes, array refs or hash refs, any data they contain will be lost.

  my @arr = qw(foo bar baz);
  share(@arr);
  # @arr is now empty (i.e., == ());
  # Create a 'foo' object
  my $foo = { 'data' => 99 };
  bless($foo, 'foo');
  # Share the object
  share($foo);        # Contents are now wiped out
  print("ERROR: \$foo is empty\n")
      if (! exists($foo->{'data'}));

Therefore, populate such variables after declaring them as shared. (Scalar and scalar refs are not affected by this problem.)

It is often not wise to share an object unless the class itself has been written to support sharing. For example, an object's destructor may get called multiple times, once for each thread's scope exit. Another danger is that the contents of hash-based objects will be lost due to the above mentioned limitation. See examples/class.pl (in the CPAN distribution of this module) for how to create a class that supports object sharing.

Does not support splice on arrays!

Taking references to the elements of shared arrays and hashes does not autovivify the elements, and neither does slicing a shared array/hash over non-existent indices/keys autovivify the elements.

share() allows you to share($hashref->{key}) without giving any error message. But the $hashref->{key} is not shared, causing the error "locking can only be used on shared values" to occur when you attempt to lock($hasref->{key}).

View existing bug reports at, and submit any new bugs, problems, patches, etc. to: http://rt.cpan.org/NoAuth/Bugs.html?Dist=threads-shared

SEE ALSO

threads::shared Discussion Forum on CPAN: http://www.cpanforum.com/dist/threads-shared

Annotated POD for threads::shared: http://annocpan.org/~JDHEDDEN/threads-shared-1.14/shared.pm

Source repository: http://code.google.com/p/threads-shared/

threads, perlthrtut

http://www.perl.com/pub/a/2002/06/11/threads.html and http://www.perl.com/pub/a/2002/09/04/threads.html

Perl threads mailing list: http://lists.cpan.org/showlist.cgi?name=iThreads

AUTHOR

Artur Bergman <sky AT crucially DOT net>

threads::shared is released under the same license as Perl.

Documentation borrowed from the old Thread.pm.

CPAN version produced by Jerry D. Hedden <jdhedden AT cpan DOT org>.